The compact printer offers dual-sided operations on both the color-printing module and the lamination station. A protection film is applied over the surface with hot roller technology, after the graphical and electrical personalization process. The film is either a continuous layer of varnish or a patch. Editing and encoding a secure badge is just a matter of a single pass.

• Color dye sublimation and monochrome thermal transfer
• Enhanced color management system for top quality pictures
• Dual-sided and edge-to-edge printing
• Color dye sublimation and monochrome thermal transfer
• Edge-to-edge printing as standard

• Color printing module and laminating unit
• 300 dpi print head (11.8 dots/mm)
• USB & Ethernet TCP-IP connection
• 16 MB RAM allowing two card storages (front & back)
• Flip-over station for dual-sided printing or laminating
• Detachable feeder with a capacity of 100 cards (0.76 mm or 30 mil)

• Output hopper with a capacity of 100 cards (0.76 mm or 30 mil)
• Reject box for 15 cards (0.76 mm or 30 mil)
• Two-line LCD display and a status LED
• Locking system to secure access to blank cards, ribbons, films and rejected cards

• Support for a Kensington® locking system

•  Full card varnish and patch films
•  Dual-sided lamination Speed range: 2 mm/s to 18 mm/s (0.08 inch/s to 0.71 inch/s)
• Temperature range: 100°C to 180°C (212°F to 356°F)

• Personalization throughput will depend on card design and lamination speed settings
  
• YMCK-K, 1.0 mil patch single-side - 85 to 105 cards/hour
  
• YMCK, 1.0 mil patch single-side - 95 to 120 cards/hour

• Generic thin holographic overlay film, full card surface - 400 cards/rol
• Clear patch 1 mil film - 200 cards/roll Clear patch 0.6 mil film - 200 cards/roll
  
• Special patches and thin overlay films upon request

• 2-panel KO black monochrome ribbon - 500 cards/roll
• 5-panel YMCKO color ribbon - 200 cards/roll
• 6-panel YMCKO-K color ribbon - 200 cards/roll
• Half-panel YMCKO color ribbon - 400 cards/roll
• Monochrome ribbons - 1,000 cards/roll: available in black, red, green, blue, white, gold and silver

•  All PVC and Composite PVC cards

•  ISO CR-80 - ISO 7810 (53.98 mm x 85.60 mm - 3.375" x 2.125")

•  From 0.25 mm (10 mil) to 1 mm (40 mil)

•  No lamination under 0.50 mm (20 mil), recommended from 0.76 mm
   (30 mil min.)

• USB and Ethernet ports (USB Cable supplied)

• 100 cards (0.76 mm - 30 mil)

• 100 cards (0.76 mm - 30 mil)

• Without card hopper: L 562.7 mm x W 262.16 mm x H 274.64 mm (L 22.15" x W 10.32" x H 10.81")

• With card hopper: L 658.2 mm x W 262.16 mm x H 274.64 mm (L 25.91" x W 10.32" x H 10.81")

• 33.14 lbs (15.4Kg)

• 110~230 Volts CA, 60~50 Hertz

• Min / Max operating temperatures: 15° / 30° C (59° / 86° F)>
• Humidity: 20% to 65% non-condensing
• Min / Max storage temperatures: -5° / +70° C (23° / 158° F)
• Storage humidity: 20% to 70% non-condensing
• Operating ventilation: free air

• Encoding options (can be combined)
• Magnetic stripe encoder ISO 7811 or JIS2 - HiCo/LoCo
• Smart contact station - ISO 7816-2
• Smart contact station and encoding unit - PC/SC, EMV 2000-1
• Contactless encoding unit - ISO 14443A, B, ISO 15693, Mifare, DesFire, HID iCLASS

• Other types upon request
• 100-card additional feeder: Ruby, Lagoon, Glacier

• Use Evolis Genuine products for best performance and extended lifespan of your printer

• Printer, lamination module, print head, and lamination hot roller: a 2-year warranty with a maximum of 100 000 inserted cards, which ever comes first*