DocumentsDate added

TTP8200 Windows Driver (XP/2000)

Requires firmware version 3.20 or higher.

• Download

TSP800RX 32bit and 64bit Driver

• Download

Swecoin Windows Driver Documentationhot!

Swecoin Windows Driver Documentation

• Download
• View

Swecoin TTP20x0 Driver for NT4/2000/XPhot!

Note: This driver package requires firmware 3.20 or higher. Please refer to your product manual for how to determine your currently loaded firmware version. If you do not have 3.20 or higher currently installed, upload version 3.20 (included in the Firmware folder of this package) first, then install the new driver.

 Installation

This is a Microsoft-signed (Windows Logo Certified) driver. Previously, when installing the driver, a Security Warning box would appear, telling you that the driver is unsigned and you would have to manually dismiss the dialog. With a signed driver, this is not necessary. You may perform unattended, completely automated installations. To do this, unpack the driver files and run Setup.exe to install the driver files before attaching the printer to the system. When the printer is attached, Windows will recognize the device and install it automatically.

1. If a Swecoin driver was previously installed, please use the Uninstallation tool.
2. Unzip your driver package file.
3. Run the Setup.exe program located in the driver directory.
4. Plug in the printer. Windows will detect and install the printer automatically.

• Download

Swecoin TTP1030 USB Windows 98/ME Driverhot!

This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.

This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages.

Installation:
Unzip the files into a temporary directory and run the Installer. In Windows 98 you have to run a patch. After re-boot, Install the printer and when the Hardware Wizard detects the printer, install the USB Printing Support, NOT the driver. Then install the driver via the Add Printer Wizard and select the USB port. See also the instruction in the Readme file.

• Download